China-pakistan economic corridor first unit operating major energy projects

China-pakistan economic corridor first unit operating major energy projects

This is a panoramic view of the sahiwal coal-fired power station in Pakistan on May 25.

After 168 hours of full-load trial operation, unit 1 of the sahiwal coal-fired power station in the china-pakistan economic corridor has been successfully put into operation. This is the first high-efficiency coal-fired power unit put into operation under the china-pakistan economic corridor. It is also the largest, most advanced and fastest coal-fired power unit in Pakistan.

Bitu power plant circulating water corrosion scale inhibitor products recommended:

Corrosion inhibitor and scale inhibitor BT6010 product description

Corrosion inhibitor and scale inhibitor BT6010 is a new generation of all-organic compound formulation developed by BITU for power plant circulating cooling water system on the basis of all-organic compound formulation, especially suitable for medium and high calcium hardness water quality, which can effectively inhibit the corrosion of carbon steel, copper and copper alloy by circulating water.

I. performance

Corrosion inhibitor and scale inhibitor BT6010 is a new generation of all-organic compound formulation developed by BITU for power plant circulating cooling water system on the basis of all-organic compound formulation, especially suitable for medium and high calcium hardness water quality, which can effectively inhibit the corrosion of carbon steel, copper and copper alloy by circulating water. At the same time, it can effectively prevent calcium carbonate, calcium phosphate and other insoluble salts in circulating water from precipitation in heat exchange equipment. Therefore, this product has excellent corrosion inhibition performance and scale inhibition dispersion performance, through strict static and dynamic tests and field application tests of power plants, the effect is obvious, not subject to environmental restrictions, PH 7.0-9.0 natural PH operation, easy to use, can be directly added to the circulating cooling water.

Ii. Quality indicators

Appearance: light yellow transparent liquid

Main ingredients: organic polymer

PH value (1% aqueous solution) 2.5±1.0

Density (20℃) g/cm 1.10±0.05

Corrosion inhibitor content %≥0.80

Inlet pH value: 5-9

The decomposition product after the sting: soluble in water and salt

Storage temperature: 0℃

Characteristics of preparation: imported raw materials are prepared according to domestic water quality

Three: application scope

1. When this product is used alone, the use concentration is: 30-100mg/L. Can be mixed with other agents, the use of concentration can be greatly reduced;

2. Applicable to power plants, steel mills, circulating water, central air conditioning systems, heat exchangers, heat exchangers, injection molding equipment and other applications in various water quality operating environments.

Four: packaging and storage

Plastic drum, net weight 25 kg/drum; Shelf life: keep away from light and shade, shelf life is one year.

Five: safety and protection

Wear latex gloves, protective glasses, protective clothing, if the splash to the eyes, please immediately rinse the eyes with plenty of water, and quickly see the doctor. Prevent overflow on the cement floor to avoid corrosion. If the cement floor is eroded, please flush immediately with clean water.